<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
<channel>
<title>主板</title>
<link>/plus/list.php?tid=12</link>
<description>硬件 / 主板</description>
<language>zh-cn</language>
<generator>Copyright© 2005-2008　PCYOO.COM All Rights Reserved  豫ICP备07004467号</generator>
<webmaster>412502119@qq.com</webmaster>
<item>
    <title>主板COM口或并行口、IDE口失灵</title>
    <link>/Hardware/Motherboard/20080515/2117.html</link>
    <description>出现此类故障一般是由于用户带电插拔相关硬件造成，此时用户可以用多功能卡代替，但在代替之前必须先禁止主板上自带的COM口与并行口（有的主板连IDE口都要禁止方能正常使用）。</description>
    <pubDate>2008-05-15</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>常见故障一：开机无显示</title>
    <link>/Hardware/Motherboard/20080515/2113.html</link>
    <description>电脑开机无显示，首先我们要检查的就是是BIOS。主板的BIOS中储存着重要的硬件数据，同时BIOS也是主板中比较脆弱的部分，极易受到破坏，一旦受损就会导致系统无法运行，出现此类故障一般是因为主板BIOS被CIH病毒破坏造成（当然也不排除主板本身故障导致系统无法运行。）</description>
    <pubDate>2008-05-15</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>主板驱动导致电脑死机故障</title>
    <link>/Hardware/Motherboard/20080424/1823.html</link>
    <description>朋友组装不久的电脑最近时常发生死机的故障，故障现象是在运行一些图形图像处理软件时</description>
    <pubDate>2008-04-23</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>主板故障排除</title>
    <link>/Hardware/Motherboard/20080316/1261.html</link>
    <description>主板作为电脑核心，由于其</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>主板故障的简单判断方法</title>
    <link>/Hardware/Motherboard/20080316/1260.html</link>
    <description>主板是负责连接电脑配件的</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>主板故障与维修</title>
    <link>/Hardware/Motherboard/20080316/1259.html</link>
    <description>主板是电脑的关键部件，用</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>电脑主板故障诊断卡代码大全</title>
    <link>/Hardware/Motherboard/20080316/1258.html</link>
    <description>00 . 已显示系统的配置；即</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>BIOS不能设置</title>
    <link>/Hardware/Motherboard/20080316/1257.html</link>
    <description>电脑开机后进入BIOS设置程</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>清除CMOS后无法启动</title>
    <link>/Hardware/Motherboard/20080316/1256.html</link>
    <description>在BIOS里修改了硬盘的参数</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>如何打开主板上关闭的NCQ功能？</title>
    <link>/Hardware/Motherboard/20080316/1255.html</link>
    <description>技嘉GA-K8N-SLI采用的是nFo</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>热插拔修主板BIOS深入分析</title>
    <link>/Hardware/Motherboard/20080316/1254.html</link>
    <description>刷新主板BIOS的方法在很多</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>
<item>
    <title>主板跳线</title>
    <link>/Hardware/Motherboard/20080316/1253.html</link>
    <description>主板上的跳线一般包括CpU设</description>
    <pubDate>2008-03-16</pubDate>
    <category>主板</category>
    <author>秩名</author>
    <comments>PCYOO     崇尚互联共享</comments>
</item>

</channel>
</rss>
